Powerhead vs. String Trimmer

Clearing up lawns can be quite a challenge, especially if you don’t have the right tools. String trimmers have always been a staple when it comes to cutting grass, weeds, and other plants that may cause your garden to look less neat than usual. However, one product is fast becoming a worthy challenger to the string trimmer. This is none other than the Powerhead. Is this product from Ego the type of cutting tool that you need? More importantly, is it actually better than your standard string trimmer? This comparison will answer those questions and more.

To start things off, it would be nice to take a closer look at the Powerhead trimmer. At first glance, you can see right away that the Powerhead is slightly bigger than the usual 15-inch string trimmer. This gives off the immediate impression that this product is better equipped for heavy-duty cutting. On closer inspection, the Powerhead also has a larger reload head and a wider, deeper guard. The Powerhead houses a 2000-watt motor, which gives it more than enough power for trimming the lawn. Aside from the grass cutter, the Powerhead also comes with other attachments such as the edger and the chainsaw.

On paper, one can see that the Powerhead is a completely different animal compared to the usual string trimmer. On the next part of this article, we will compare how both of these tools perform and see if a clear winner can be picked between the two.

Performance– On the performance side of things, the larger motor of the Powerhead means it can cut through tougher grass much easier compared to your usual string trimmer. The larger dimensions of the head also make it more resistant to tangles, which can help in quickening the pace of your cutting. However, the immense power of the Powerhead may prove to be a disadvantage for some, as its motor can be quite difficult to handle at full throttle.

Control– This is one of the more distinct advantages of the trusty string trimmer. Handling its power is a much easier task compared to using the Powerhead. At the same time, the smaller, lighter head of the string trimmer makes it much easier to use. This is especially so when you are maneuvering around the tight spaces in your lawn. The Powerhead is still controllable in spite of these things, but you’ll need to get used to its power and weight.

Value– In terms of value, it all depends on what you need in a grass cutter. The string trimmer has more than enough performance to get the job done right on most occasions. However, if you are looking for something more suited for heavy-duty use, then you might want to consider the Powerhead. The Powerhead can also be converted for other uses, but that might not matter if you’re just looking for something to trim your lawn.

At the end of the day, you can’t go wrong with going for either device. The Powerhead has better performance, but the string trimmer is more user-friendly. Choose the unit you think you’ll be more comfortable using.

How to Change a Spool on Weed Eater

One of the greatest and most useful tools for you to keep or maintain the cleanliness and beauty of your garden is a weed eater. Through the use of a specific type of weed eater, you can trim your yard and make around its edges very neatly. However, it is quite unfortunate to say that a plastic cording may only lasts longer in a spool prior to alter it.

If that happens to the tool that you are utilizing, it is essential to change or alter first the spool of its monofilament. Try to keep in touch on the succeeding discussions for these will be your guide on proper maintenance of string trimmer or weed eater that you have.

If you have the eagerness and perseverance to look for the proper ways and approaches on how to change a spool on the monofilament of your weed eater, then try to refer on the following lists and steps as your guide:

  1. If it is an electric type of weed eater, then you need to unplug it for safety purpose. If the model that you have is a gas trimmer type, then it is essential to get rid of the spark plug of it.
  2. Tilt the model or the unit so that you can properly have an easy access to the monofilament’s spool. Then, try to unscrew the cap based on the directions which were shown in the model of your tool. The next thing that you need to do is to pull off the spool from the weed eater. Clean first any debris or grass from its head if there is any.
  3. Unroll the replacement line of the weed eater from the spool of the replacement. It must be approximately 30 ft for great convenience and assurance that you can achieve best results. Also, you need to make sure that you have measured the correct diameter of your weed eater.
  4. Insert at least 1-inch of the line’s weed eater into the middle of your weed eater’s spool. Then, wrap the line of the weed eater snugly onto the spool of it. Make sure that you wrap it according to the direction of the spool’s arrow.
  5. Run the weed eater cord’s tail out through its feedhole. Put the spool of the monofilament back to the weed eater. Make sure that you put it back with 4-6 inches of tail that extends from the tool. Tighten the cap of it to make sure that it will be back in its place.
  6. Plug in the weed eater if it’s electric type or put the spark plug back on your weed eater if it’s a gas trimmer type. Then, you may now continue trimming grasses and weeds. You may probably need to tap its ground unit to properly feed it. If it does not, then, disconnect the source of your power and re-check if the line is feeding properly through its feed hole.

With these step-by-step procedures, you can now successfully change the spool of the weed eater’s monofilament and continue your gardening works for good. You will no longer find any difficulty in doing your gardening tasks since you have already the knowledge on how to maintain the longevity of your gardening tool – weed eater.

If you want more details and information about the proper and additional ways of prolonging the lifespan of your tool, then try to read more buying guide online. There are some online sites that provide great and useful information about this matter.

The Ease of Zero Turn Mowers

They have revolutionized the way people mow lawns. With technology once only reserved for industrial use, they’ve enabled the homeowner with the ease and convenience of being able to turn their lawn mowers in a complete 360’ circle. The ability to turn the wheels with ease allows for greater flexibility. The mower can easily maneuver the machine in a number of different directions with speed. This means that you can get closer to edges and have greater flexibility when it comes to mowing around large objects or other obstacles that otherwise might prove difficult.

When choosing one, you’ll find that they vary greatly in price range as well as in capabilities. You can choose between residential models and those that are designed for commercial applications, such as golf courses and other large landscapes, however the homeowner will be content with residential versions. Since there is a wide range of mowers available, it is a good idea to set your budget and choose the mower that is on the higher end of your spectrum. Choosing the best mower that your budget allows is always the wisest choice.

It’s important to select those that have sturdy, durable frames. This will ensure that the mower will be able to withstand the constant action of mowing and turning. Also, you will need to ensure that the mower has a high quality motor that is in great condition. These are the most important aspects of these mowers, and by considering them in your selection process, you can ensure that your it will reward you with low maintenance over the years. You might want to consider selecting modzero turn versions. They have been constructed from low gauge steel as these mowers tend to have thicker and more durable frames.

You can find them in a wide range of prices, and once you begin to experience their capabilities, you’ll quickly see that they are well worth any cost. It’s best to set your budget ahead of time, as you might find yourself envisioned upon one of the pricier commercial models capable of leveling golf courses in lightening speed and with supreme accuracy. For residential purposes, you won’t need one of the commercial models, but you will want to spend a good amount for quality. Ensure that the motor and frame are in mint condition and you won’t need to worry about maintenance fees either. They are revolutionizing the way people mow lawns.